SWM24QF-3AE – NEMA 24 SWM24QF-3AE

Descripción

Part Number: SWM24QF-3AE
Supply Voltage: 12-70 VDC
Supply Voltage Type: DC
Control Modes:
Step & Direction
Analog Torque / Velocity
Velocity (Oscillator)
Streaming Commands
Analog Positioning
Encoder Following
Q Programming
Modbus RTU
Communication Ports: RS-232
Encoder Feedback: Yes
Step Resolution:
Full
Half
Microstepping
Microstep Emulation
Idle Current Reduction: 0-90%
Setup Method: Software setup
Digital Inputs: 4 Flex I/O (shared with outputs)
Digital Outputs: 4 Flex I/O (shared with inputs)
Analog Inputs: 1 single ended
Circuit Protection:
Short circuit
Over-voltage
Under-voltage
Over-temp
Status LEDs: 1 red, 1 green
Frame Size: NEMA 24
Holding Torque: 340 oz-in
Step Angle: 1.8 deg
Rotor Inertia: 1.27E-02 oz-in-sec2
Length: 5.03 inches
Weight: 56 oz
Operating Temperature Range: -20 to 50 °C
Ambient Temperature Range: 0 to 40 °C
Ambient Humidity: 90%
Insulation Class: Class B (130 ºC)
Shaft Diameter: 8 mm (0.315 inch)
Maximum Radial Load: NA lbs
Maximum Thrust Load: NA lbs
Shaft Run Out: 0.0012 inch T.I.R. max
Radial Play: 0.0008 inch max w/ 1.1lb load
End Play: 0.003 inch max w/ 1.1lb load
Perpendicularity: 0.004 inches inch
Concentricity: 0.002 inches inch

Manuals:
SWM24 Hardware Manual_920-0068B-opt-.pdf

2D Drawing:

SWM24_Simple_3Dpdf.pdf