STEPSERVO TSM17C-3CG

$826.85

TSM17C-3CG – NEMA 17 Integrated CANopen StepSERVO™ Motor w/ Q Programming

SKU: TSM17C-3CG Categorías: ,

Descripción

Part Number: TSM17C-3CG
Supply Voltage: 12-48 VDC
Supply Voltage Type: DC
Current Draw from Power Supply: 1.35 A max
Control Modes: CANopen
Communication Ports: CANopen
Encoder Feedback: Yes
Encoder Resolution: 5,000 lines (20,000 counts quadrature)
Setup Method: Software setup
Digital Inputs: 8
Digital Outputs: 4
Analog Inputs: 1 single-ended
Circuit Protection:
Short circuit
Over-voltage
Under-voltage
Over-temp
Status LEDs: 1 red, 1 green
Frame Size: NEMA 17
Holding Torque: 73 oz-in
Step Angle: 1.8 deg
Rotor Inertia: 1.16E-03 oz-in-sec2
Length: 3.28 inches
Weight: 15.5 oz
Operating Temperature Range: 0-85 °C
Ambient Temperature Range: 0-40 °C
Ambient Humidity: 90% max, non-condensing
Insulation Class: Class B (130 ºC)
Shaft Diameter: 6 mm (0.236 inch)
Maximum Radial Load: 10 lbs
Maximum Thrust Load: Less than 1 lbs

Manuals:
pdf TSM17C Hardware Manual_EN-AMP_920-0085A-opt.pdf

2D Drawing:

pdf TSM17C-3CG_RevA.pdf