STEPMOTOR HW24-108

Descripción

Part Number: HW24-108
Frame Size: NEMA 24
Motor Type: High torque
Part Number w/Encoder & Cover: HW24-108D-ZAC
Encoder Feedback: Optional
Encoder Resolution: 2,000 lines (8,000 counts quadrature)
Motor Length: 3.72 inches
Number of Lead Wires: 4
Lead Wire Configuration: shielded cable, no connector
Lead Wire/Cable Length: 10 feet
Lead Wire Gauge: 22 AWG
Bipolar Holding Torque: 354 oz-in
Step Angle: 1.8 deg
Bipolar Parallel Current: 4.0 A/phase
Bipolar Parallel Resistance: 1.1 Ohms/phase
Bipolar Parallel Inductance: 2.1 mH/phase
Rotor Inertia: 1.27E-02 oz-in-sec2
Integral Gearhead: No
Weight: 3.0 lbs
Storage Temperature: -30 to 70 °C
Operating Temperature: -20 to 50 °C
Insulation Class: Class B (130 ºC)
Shaft Diameter: 8 mm (0.315 inch)
Shaft Run Out: 0.0012 inch T.I.R. max
Radial Play: 0.0008 inch max w/ 1.1 lb load
End Play: 0.003 inch max w/ 1.1 lb load
Perpendicularity: 0.004 inches
Concentricity: 0.002 inches

2D Drawing:

HW24-108_RevF.pdf
HW24-108D-ZAC_RevC.pdf
HW24-108D-ZAC_3D.pdf

Speed-Torque Curves:

StepMtrAppData_HW24-108_RevA.pdf