STEPMOTOR HT34-486

$505.20

HT34-486 – NEMA 34 High Torque Step Motor

SKU: HT34-486 Categorías: ,

Descripción

Part Number: HT34-486
Frame Size: NEMA 34
Motor Type: High torque
Part Number w/Double Shaft: HT34-486D
Part Number w/Encoder: HT34-486D-YAA
Encoder Feedback: Optional
Encoder Resolution: 2,000 lines (8,000 counts quadrature)
Motor Length: 4.63 inches
Number of Lead Wires: 8
Lead Wire Configuration: flying leads, no connector
Lead Wire/Cable Length: 18 inches
Lead Wire Gauge: 22 AWG
Unipolar Holding Torque: 785 oz-in
Bipolar Holding Torque: 1110 oz-in
Step Angle: 1.8 deg
Bipolar Series Current: 4.03 A/phase
Bipolar Series Resistance: 1.04 Ohms/phase
Bipolar Series Inductance: 10.8 mH/phase
Bipolar Parallel Current: 8.06 A/phase
Bipolar Parallel Resistance: 0.26 Ohms/phase
Bipolar Parallel Inductance: 2.7 mH/phase
Unipolar Current: 5.70 A/phase
Unipolar Resistance: 0.52 Ohms/phase
Unipolar Inductance: 2.7 mH/phase
Rotor Inertia: 4.53E-02 oz-in-sec2
Integral Gearhead: No
Weight: 7.7 lbs
Storage Temperature: -40 to 70 °C
Operating Temperature: -20 to 50 °C
Insulation Class: Class B (130 ºC)
Maximum Radial Load: 42 lbs
Maximum Thrust Load: 33 (2.2 w/ encoder) lbs
Shaft Diameter: 12.7 mm (0.500 inch)
Shaft Run Out: 0.002 inch T.I.R. max
Radial Play: 0.001 inch max w/ 1.1 lb load
End Play: 0.003 inch max w/ 2.2 lb load
Perpendicularity: 0.003 inches
Concentricity: 0.003 inches

2D Drawing:

pdf HT34-486_RevG.pdf
pdf HT34-486D-YAA_RevB.pdf

Speed-Torque Curves:

pdf ST_speed-torque.pdf
pdf STR_speed-torque.pdf