Descripción
Part Number: HT23-595
Frame Size: NEMA 23
Motor Type: High torque
Part Number w/Double Shaft: HT23-595D
Part Number w/Encoder: HT23-595D-ZAA
Encoder Feedback: Optional
Encoder Resolution: 2,000 lines (8,000 counts quadrature)
Motor Length: 1.61 inches
Number of Lead Wires: 8
Lead Wire Configuration: flying leads, no connector
Lead Wire/Cable Length: 18 inches
Lead Wire Gauge: 22 AWG
Unipolar Holding Torque: 53.8 oz-in
Bipolar Holding Torque: 76.5 oz-in
Step Angle: 1.8 deg
Bipolar Series Current: 2.12 A/phase
Bipolar Series Resistance: 1.2 Ohms/phase
Bipolar Series Inductance: 2.4 mH/phase
Bipolar Parallel Current: 4.24 A/phase
Bipolar Parallel Resistance: 0.3 Ohms/phase
Bipolar Parallel Inductance: 0.6 mH/phase
Unipolar Current: 3.0 A/phase
Unipolar Resistance: 0.6 Ohms/phase
Unipolar Inductance: 0.6 mH/phase
Rotor Inertia: 1.91E-03 oz-in-sec2
Integral Gearhead: No
Weight: 0.93 lbs
Storage Temperature: -30 to 70 °C
Operating Temperature: -20 to 50 °C
Insulation Class: Class B (130 ºC)
Shaft Diameter: 6.35 mm (0.250 inch)
Shaft Run Out: 0.002 inch T.I.R. max
Radial Play: 0.001 inch max w/ 1.1 lb load
End Play: 0.003 inch max w/ 1.1 lb load
Perpendicularity: 0.004 inches
Concentricity: 0.002 inches
2D Drawing:
HT23-595_RevD.pdf
HT23-595D-ZAA_RevA.pdf
Speed-Torque Curves:
