Descripción
Part Number: HT23-548
Frame Size: NEMA 23
Motor Type: High torque
Part Number w/Double Shaft: HT23-548D
Part Number w/Encoder: HT23-548D-ZAA
Encoder Feedback: Optional
Encoder Resolution: 2,000 lines (8,000 counts quadrature)
Motor Length: 1.71 inches
Number of Lead Wires: 8
Lead Wire Configuration: shielded cable w/ connector
Lead Wire/Cable Length: 10 feet
Lead Wire Gauge: 24 AWG
Unipolar Holding Torque: 59.7 oz-in
Bipolar Holding Torque: 84.4 oz-in
Step Angle: 1.8 deg
Bipolar Series Current: 1.41 A/phase
Bipolar Series Resistance: 2.8 Ohms/phase
Bipolar Series Inductance: 5.6 mH/phase
Bipolar Parallel Current: 2.83 A/phase
Bipolar Parallel Resistance: 0.7 Ohms/phase
Bipolar Parallel Inductance: 1.4 mH/phase
Unipolar Current: 2.00 A/phase
Unipolar Resistance: 1.4 Ohms/phase
Unipolar Inductance: 1.4 mH/phase
Rotor Inertia: 1.70E-03 oz-in-sec2
Integral Gearhead: No
Weight: 1.0 lbs
Storage Temperature: -40 to 70 °C
Operating Temperature: -20 to 50 °C
Insulation Class: Class B (130 ºC)
Shaft Diameter: 6.35 mm (0.250 inch)
Shaft Run Out: 0.002 inch T.I.R. max
Radial Play: 0.001 inch max w/ 1.0 lb load
End Play: 0.003 inch max w/ 1.0 lb load
Perpendicularity: 0.004 inches
Concentricity: 0.003 inches
2D Drawing:
HT23-548_revH.pdf
HT23-548D-ZAA_RevA.pdf
Speed-Torque Curves:
