STEPMOTOR HT34-504

Descripción

Part Number: HT34-504
Frame Size: NEMA 34
Motor Type: High torque
Part Number w/Double Shaft: HT34-504D
Part Number w/Encoder: HT34-504D-YAA
Encoder Feedback: Optional
Encoder Resolution: 2,000 lines (8,000 counts quadrature)
Motor Length: 2.62 inches
Number of Lead Wires: 8
Lead Wire Configuration: flying leads, no connector
Lead Wire/Cable Length: 12 inches
Lead Wire Gauge: 22 AWG
Unipolar Holding Torque: 297 oz-in
Bipolar Holding Torque: 397 oz-in
Step Angle: 1.8 deg
Bipolar Series Current: 3.18 A/phase
Bipolar Series Resistance: 0.96 Ohms/phase
Bipolar Series Inductance: 6.8 mH/phase
Bipolar Parallel Current: 6.30 A/phase
Bipolar Parallel Resistance: 0.24 Ohms/phase
Bipolar Parallel Inductance: 1.7 mH/phase
Unipolar Current: 4.50 A/phase
Unipolar Resistance: 0.48 Ohms/phase
Unipolar Inductance: 1.7 mH/phase
Rotor Inertia: 1.56E-02 oz-in-sec2
Integral Gearhead: No
Weight: 3.5 lbs
Storage Temperature: -30 to 70 °C
Operating Temperature: -20 to 50 °C
Insulation Class: Class B (130 ºC)
Maximum Radial Load: 28 lbs
Maximum Thrust Load: 6.3 lbs
Shaft Diameter: 12.7 mm (0.500 inch)
Shaft Run Out: 0.002 inch T.I.R. max
Radial Play: 0.001 inch max w/ 1.1 lb load
End Play: 0.003 inch max w/ 1.1 lb load
Perpendicularity: 0.004 inches
Concentricity: 0.002 inches

2D Drawing:

HT34-504_RevE.pdf
HT34-504D-YAA_RevB.pdf

Speed-Torque Curves:

STR_speed-torque.pdf
ST_Speed_Torque_revF_Size34.pdf